DeviceShare for OpenVMS Mass StorageThe DeviceShare utility allows a member of a DECnet network or a VMScluster to share its local tape and disk devices with other nodes. By providing such access, the usefulness, connectivity, and availability of all your mass storage devices is expanded.
Figure 1: A mixed DECnet/VMScluster Configuration
To make a device accessible to other nodes in your network, you must install and license the system on the serving node. A server node is the system which has physical access to the device. This software provides both automatic and manual device serving capabilities. In the automatic mode, DeviceShare provides serving of all tape and/or disk devices. In the manual mode, the System Manager must specifically enable a device for access. Regardless of mode, DeviceShare does provide the ability to either INCLUDE or EXCLUDE nodes in your network from use. To gain access to the device, you must install and license the DeviceShare system on the client node. A utility command permits you to obtain information concerning those devices which are shareable on the Server node as well as those remote devices in use on a remote node. To actually use them, you issue the ALLOCATE command. This command determines whether you can gain access to the device (i.e. proper security, device not in use), and, if so, creates a special pseudo device for your local use. DeviceShare does support network data compression and time-based multiplexing of messages across the network for maximum efficiency. The ALLOCATE command also provides a generic naming feature by which a System Manager can associate alias names to served devices. For example, if a tape drive on VAXA is known as $1$MUA0: and supports 6250-bpi, the System Manager might assign it the alias 6250bpi. This is particularly useful if multiple 6250 tape drives were on the same node. By naming all the 6250 tape drives, 6250bpi, a generic ALLOCATE command will return access to the first available drive. This generic naming facility allows you to provide easy to remember names for various disk and tape devices without requiring users to actually know the physical device name.
Shareable access to a disk device is supported. If the disk is mounted as a Files-11 device, then transparent file access is permitted. The Files-11 device may be either a single volume or a multiple device volume set. The ALLOCATE command for a remotely mounted disk causes the device to also become locally mounted. While files may be opened for read and/or write access, DeviceShare will not permit multiple simultaneous write access to a single file due to locking/consistency considerations. However you have the ability to exclusively gain access to a remote disk, in which case, complete file sharing is provided. Three (3) security levels for remote client user access to a shared disk: Authentication, Server and Client. Authentication requires the remote client user to verify his account and password on the server system prior to shared disk access. Server security requires the remote client user to have an account on the server system, and DeviceShare will apply the server's privileges on shared disk access. Client security is similar to server security except the remote client user's privileges will be used when accessing a shared disk.
A built in network data compression algorithm which, depending on your data, can increase the effective utilization of your served network device. Support for Network Throttling, which permits a node to constrain the amount of network bandwidth it can consume, is also supported.
An automatic network reconnection facility is provided with the software. In the event your network is temporarily disrupted, DeviceShare will automatically attempt to reconnect between the Server and Client systems. This reconnection appears to the system as a mount verification. Mount verification messages will appear when the connection is broken, regained or aborted. Just as with mount verification, the reconnection interval is user controlled and the default time period is five (5) minutes. The automatic network reconnection facility is particularly useful when you are backing up a large disk to tape and the backup is expected to take several hours. If the software is able to reconnect, and the source and target devices remain in a consistent state, your backup will continue with no loss of data or failure.
DeviceShare provides remote users with the ability to determine which remote devices are currently in use and/or served to their node.
Figure 1 illustrates a mixed cluster/network environment. Node A and B have cluster access to the high-speed tape and disk devices through the HSC. Nodes C and D are network members. Node C has a local SCSI disk and Node D has both several SCSI disks and a CDROM device. By installing this software on all the nodes in this configuration, Node A, B and C gain access to the CDROM device on Node D, and Nodes C and D gain access to the high-speed tape and disk drives on the VMScluster. This illustration also depicts a centralized backup approach, where Nodes A and/or B can backup Nodes C and D's disk drives onto a common tape media.
Operator Message Handling:
DeviceShare automatically and transparently handles OPCOM requests related to remotely served devices. For example, if Node A is serving a tape (or disk) to Node B, and Node B needs to request a specific tape, the handling of that request is transparent to Node B. Node B's OPCOM request is automatically routed to the operator on Node A. Any operator replies are also re-routed back to Node B. In addition, a special OPCOM command which allows your DCL procedures to request special device handling from an operator has been implemented. The operator's reply can be placed in a DCL symbol of your choosing for later programmatic interpretation.
Figure 2: Transparent Operator Services
Minimum Hardware Supported:
This product requires a valid OpenVMS configuration and supports the entire family of VAX and Alpha AXP processors. This software is warranted for use with all Digital supported busses, used in conjunction with a Digital-supplied device driver.
This software also works with all third-party controllers and disk/tape drives that use unmodified, Digital disk/tape-device drivers.
Any VAX processor, using VMS Version 5.5-2 or later and any Alpha processor using OpenVMS Version 6.1 or later.
When used for network operation, DECnet and/or TCP-IP are supported. If you plan on using DECnet then a DECnet End-node or Full-function license is required. Currently, TGV's Mulinet, Process Software's TCPware and Digital's TCP-IP Services for OpenVMS are supported. DeviceShare automatically detects the appropriate vendor's TCP product in use. When used for cluster operation, a VMScluster environment is required. If you are running OpenVMS VAX V5.5 (or later) or OpenVMS Alpha V1.5 (or later) you cannot run DeviceShare's TMSCP cluster software and Digital's TMSCP server at the same time. This restriction does not apply to DeviceShare's network services.
This software is sold through ASCI's Software Product License Agreement which warrants the product for ninety (90) days from the date of purchase. Warranty services include technical assistance, remedial telephone support and product upgrades.
After the initial product warranty expires, ASCI offers an annual customer support plan. This includes technical assistance, remedial telephone support, product upgrades, and enhancements, as they become available. The annual customer support plan is separately priced.
The Full-Function Server license supports both disk and tape server and client functions on a single node. The Full- Function Client license supports remote disk and tape access from a remote node. The Tape-Only Server license supports only tape server and client functions on a single node. The Disk-Only Server license supports only disk server and client functions on a single node.
ASCI honors requests for other magnetic media for a minimal charge, but you must indicate these in your letter and/or purchase order. The current prices are available upon request. Multi-CPU and Educational Institutions discounts are available.
This software is licensed using Digital's License Management Facility (LMF). A Product Authorization Key (PAK) is required for each system prior to product installation and execution.
DeviceShare consists of a CD-ROM distribution of software (1), Users' Manual (1), Software Product License Agreement, Software Product Description, and Warranty Registration Certificate.
DEV-200-LIC-Full-Function Server License and Distribution Media
DEV-202-LIC-Tape Only Server License and Distribution Media
DEV-203-LIC-Disk Only Server License and Distribution Media
AD-200-DEV-GS-Getting Started Manual